
Minimum Shop
Charge
35.00
Return
Shipping
45.00
Sight Work |
|
| Deluxe Bo-Mar Install (includes flattop and stipple) | 225.00 |
| Deluxe Novak install (includes flattop and stipple) | 150.00 |
| Bo-mar install w/dovetail front sight | 200.00 |
| Standard rear sight with dovetail front | 85.00 |
| Novak install front and rear | 125.00 |
| Stake front sight | 25.00 |
| Machine front sight dovetail & fit sight | 65.00 |
| Fit a new sight to existing dovetail | 25.00 |
| Front sight insert installation | 35.00 |
| White dot into sight | 35.00 |
Slide Work |
|
| Stipple rib on top of slide | 50.00 |
| Stipple top of Browning H.P. slide | 65.00 |
| Flatten and stipple 1911 slide | 75.00 |
| Serrate rear of slide | 65.00 |
| Forward cocking serrations | 100.00 |
| Lower and flare ejection port | 50.00 |
| Tune extractor | 25.00 |
| Polish breech face | 25.00 |
| Tighten slide to frame (lateral only) | 100.00 |
| Tighten slide to frame (lateral and vertical) | 175.00 |
BARRELS AND BUSHINGS |
|
| Fit and chamber compensator and barrel w/bushing on 1911 | 250.00 |
| Fit match grade barrel on 1911 (includes throat and ramp but not fitting a match bushing) | 150.00 |
| Fit “drop in “ barrel requiring minor fitting (includes Hi-Power and Glock) | 45.00 |
| Throat and ramp | 50.00 |
| Fit match bushing | 50.00 |
| Crown barrel | 35.00 |
| Stake link pin | 10.00 |
| Machine slide for reverse plug | 35.00 |
FRAME WORK |
|
| Stipple front strap 1911 | 100.00 |
| Stipple front strap or back strap on Browning Hi-Power | 100.00 |
| Stipple front strap Para-Ordnance | 100.00 |
| Stipple mainspring housing | 45.00 |
| Modify frame for high grip | 55.00 |
| Bevel magazine well | 75.00 |
| Install extended ejector | 35.00 |
| Install and fit slide stop | 25.00 |
| Dimple slide stop | 10.00 |
| Stake plunger tube | 30.00 |
| Stake grip bushings | 25.00 |
| Fit Para-Ordnance magazine catch | 40.00 |
| Fit match trigger | 35.00 |
| Bob hammer | 45.00 |
| Round trigger or revolver polish | 45.00 |
| Install 1911 Beavertail | 85.00 |
| Install beavertail on Hi-Power | 225.00 |
| Pin grip safety | 30.00 |
| Fit thumb safety on 1911 or Hi-Power | 45.00 |
| Fit ambi-safety on 1911 | 50.00 |
TRIGGER JOBS |
|
| 1911 series 70 or 80 | 100.00 |
| Sig Sauer | 85.00 |
| Browning H.P. | 100.00 |
| S&W D/A revolver | 100.00 |
Other Work |
|
| Dehorn | 55.00 |
| Checker magazine catch | 35.00 |
| Install Pachmayr mag pads | 10.00 |
| Test fire (not including ammo) | 35.00 |
| Clean and inspect | 45.00 |
| Reliability package: throat and ramp, tune extractor, polish breechface, lower and flare ejection port, replace worn springs, Test Fire w/30 rds | 150.00 |
GLOCK WORK |
|
| Rear reduction | 100.00 |
| Front reduction | 35.00 |
| Beavertail fabrication | 90.00 |
| Round trigger guard | 30.00 |
| Texture grip only | 75.00 |
| Grip shortening package | 175.00 |
| Forward cocking serrations | 100.00 |
| Trigger connector replaced | 35.00 |